Ease of stairs is determined by a number of factors: the angle of ascent / descent rate, width of passage, the presence of rotating parts, the intermediate areas, the availability of free headroom rising man; safety fence stairs well lit. The earlier in the design stage (building) construction of the house is the stairs, the more freedom in its building has a builder. But often, this condition fails and has to pick up the staircase to an existing building. The first problem: wrong-planned space. The house is almost ready, but I have trouble – no one design that you like, can not be written into the existing size of the opening. You criticize a specialist, but he stubbornly maintains that your size is impossible to find competent the width and height stage. Problem two: planning the design features of stairs without taking into account the wall material, to which is mounting. Stairs can be attached only to the firm, usually bearing walls (made of concrete, a thick lumber, bricks, more than 25 cm thick), and in any case – plasterboard, asbestos-cement walls as thick as a half-brick – that is, 'decorative' partitions. By ordering a stairway to a specialized company, we must take into account several important points. Floor plan, indicating the intended location of the stairs. Ceiling height (to correctly identify the number of stages, the slope of the stairs and the size of the ceiling vents). Features structure and its functional purpose (spiral, angular, straight to kosour for Bolza with rotation). Theme rooms (classic, avant-garde, modern or eclectic). Dates (manufacture stairs takes one to three months). Fashion on the stairs a remarkable diversity. However, the most popular designs – wooden marching and marching, combining wood and metal. Metal frame allows you to successfully solve all the architectural and design problems, with a huge variety of designs and materials. The appearance of the stairs may be different. Stairs are usually made of wood. The carrier is coated or metal construction plasterboard or painted. Oblitsevat wood and drywall can be any metal structure, even if it was not provided. Metal kosour and embedded elements in the final set of stairs construction stage, before finishing. The remaining elements (stairs, balusters, etc.) set only after a complete drying. The minimum opening for FLOATING height of about 3 meters 140×140 cm U-shaped stairs (3 March) and 300×70 cm for the L-shaped staircase (2 March).